|
|
|
News:
Foxray Saves Time
01/14/2011
SAS recently utilized Limeware's foxray on a project involving equipment additions to existing complex control logic. The foxray tool significantly reduced engineering time and potential errors by providing
a clear, easy to follow map of the existing logic. The tool also identified code that was no longer used and could be eliminated. The additions to the control logic were installed on the online system without incident.
Up and Running
1/010/2011
Clarksville Gas & Water's new SAS supplied SCADA system is online and collecting data from RTU's designed, fabricated, and installed by SAS. The Rockwell based RTU's are communicating with the SCADA system over a fiber and radio communications
infrastructure. The system provides daily usage reports to management and customers, and replaces the legacy service callout system with a more informative and efficient callout system. The SCADA RTU's provide
both monitoring and control of the remote stations.
SAS Deploys Foxray at Major Refiner
07/23/2010
Major refiner completes evaluation of Limeware's foxray tool for IA Series and decides to purchase the
application for their refinery. Key factors in their decision were ease of use, superior integration with the IA Series system, reporting capabilities
and support.
Panel Integration Services from Strategic Automation Services
04/12/2010
SAS to provide panel integration services for major municipality. Total of 75 RTU's to be fabricated and installed on-site. RTU's will use a combination of fiber and radio communications.
SAS Awarded DCS Configuration Services for SRU
3/20/2010
Strategic Automation Services awarded project to configure DCS for a Sulfur Recovery Unit and provide on-site startup support.
SAS Provides DCS Specification & Vendor Evaluation Services
12/01/2009
Strategic Automation Services provided support services to an Asphalt Refiner to develop a DCS specification, solicit bids from DCS suppliers, compile the bids into an evaluation matrix and assist the client with
the DCS supplier selection. The project scope includes the supply and
installation of: field instrumentation, a new DCS, plant wide fiber control
network, and integration with plant historian.
SAS Awarded $1.8M DCS/SCADA System Upgrade Project
10/10/09
A $1.8M Public Utilities project was awarded to Strategic Automation Services.
SAS will provide professional services for project management, system design & engineering, procurement, system integration, installation and startup. DCS and SCADA
systems will control and monitor the water, waste water, and gas distribution systems for the client. Also included in the project is a new
Client Care Center, which will be used to manage customer service.
New Partnership With LimeWare Company
6/15/2009
Strategic Automation Services is pleased to announce its partnership with Limeware Company. Limeware solutions are the most comprehensive Knowledge Management suite available for users of the Foxboro I/A Series DCS. Limeware's
FoxRay™ product for I/A Series® includes configuration management, alarm management, operator action analysis, overall documentation and much more. By combining Strategic Automation Services' years of experience in engineering I/A Series® systems, with the applications capabilities of Limeware's
FoxRay™ toolset, we can deliver best-in-class applications and services to improve the bottom line performance of our client's manufacturing assets.
Master Services Agreement
6/10/2009
SAS signs a multi-year Corporate Master Services Agreement with large refiner in North America. SAS was already providing services to this client
through third parties. Now with this Agreement, the various refineries can enlist the support of Strategic Automation Services direct.
On-site Support
3/1/2009
SAS assists local refiner with important upgrade of DCS during recent turn-around. SAS was able to respond on short notice and address the client's needs.
Improved Operator Effectiveness
2/17/2009
A global chemical company uses SAS to program and test the interface between their DCS and SIS. The final solution improves operator effectiveness.
John Green Joins SAS!
12/15/2008
SAS is pleased to announce that John Green has joined our team. John has extensive experience in DCS design and configuration, as well as
implementation of Invensys' Oil Movements Solutions. John's most recent employment was with the largest refiner in North America, where he
spent the last five years deploying Oil Movements applications within their fleet of refineries.
SAS Awarded Engineering Service Contract
12/1/2008
Major chemicals storage facility contracts SAS to assist in commissioning and expansion of newly installed DCS. SAS was selected because
of our experience with the systems and our reputation for delivery.
Supplier Agreement Inked
11/12/2008
SAS enters into a supplier agreement with a strategic North American midstream gas company for the supply of DCS engineering services.
Renewable Energy
10/1/2008
SAS signs Supplier Agreement with renewable fuels company for the supply of control system engineering services.
Installed and commissioned Historian for renewable energy client to collect information vital to the operation of their business.
Oil Movements Consulting
8/15/2008
SAS provides consulting services for international refiner to define requirements to upgrade their oil movement system. This upgrade will replace
obsolete systems and provide tighter control of their inventories.
|
|
|
|